Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in deze stap

Bewerking door Andre Romualdo

Bewerking goedgekeurd door Andre Romualdo

Voor
Na
Ongewijzigd

Stap regels

[* black] Once display is fully unglued from the case, carefully lift it up and locate the display connector.
[* black] Using the same small plastic blue tool, carefully remove the yellow tape off the connector.
[* black] Now carefully undo the black connector locklock by lifting it up in the direction of the red arrow.
[* black] Using the same small plastic blue tool, carefully remove the yellow tape off the connector.
[* black] Now carefully undo the black connector locklock by lifting it up in the direction of the red arrow.
[* black] Lastly slide the display cable off the connector. It should easily slide off, if not make sure the black lock is fully unlatched.

Afbeelding 2

Oude versie

Nieuwe versie