Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Abigail Buckenberger

Bewerking goedgekeurd door Abigail Buckenberger


Stap regels

[* black] With fingers, pull the connecting strip away from its socket on the logic board
[* black] With the blue opening tool, take the display screen out of its socket by gently lifting each corner and flip the screen up towards the logic board
[* icon_note] Note: the screen is still connected
[* black] With the metal spudger, gently lift the film underneath the display bracket and place aside
[* black] With the blue opening tool, gently pry open metal display bracket to remove from logic board
[* black] Using your fingernail, pry the black tape up form zif socket to remove the partially attached display screen