Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #12

Bewerking door iRobot

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.
[* icon_caution] Again, there are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.
[* black] Once the putty knife has cleared the lip of the rear panel, angle the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the iPod via the gap between the iPod opening tools.
[* black] Push with your fingers on the rear panel behind the putty knife to minimize bending. Ever so slightly flex the putty knife to ensure that most of the metal tabs on this side of the iPod are disengaged.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd