Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Jan Carsten Jorgensen

Bewerking goedgekeurd door Jan Carsten Jorgensen


Stap regels

+[title] Examine, clean or replace the Capsule Piercing Plate and enjoy
+[* icon_caution] Disconnect the device from the mains voltage. You will also appreciate to remove the water container.
+[* black] Remove the capsule holder.
+[* black] Close the lid (as if you were to make a brew)
+[* black] Insert the small screwdriver in at the point shown by the red arrow, and the plate should drop down. Due to lots of calcium deposits the plate may need a little help to come down.
+[* black] Insert the new or cleaned plate, latch backend first and click in place in the front.
+[* black] Once done, connect the device and make your self a brew and see if it is well-deserved. No Leaks - You've earned it. Leaks = You need that cup to ponder where the issue then is :-)

Afbeelding 1

Geen vorige afbeelding