Wijzigingen aan stap #5
Bewerken voor Kristen Gismondi —
Bewerking goedgekeurd door Kristen Gismondi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] The final two tabs can be more difficult to release. Viewing from the front, they are located in the back left and right corners of the printer. | |
| [* red] The release points for the tabs are located in holes on the depressed area of the base (darker piece). | |
| - | |
| - | [* black] Use one of the plastic tools to keep the tab pried out. Once it releases push in towards the printer (viewing from the side) and pull up on the case. |
| + | [* orange] Use the pointed end of a spudger to pry out the tab. |
| + | [* black] Use one of the plastic tools to keep the tab pried out. Once it releases, push in towards the printer (viewing from the side) and pull up on the case. |