Wijzigingen aan stap #3
Bewerken voor Alex Lin —
- Voor
- Na
- Ongewijzigd
Stap regels
| [* icon_note] Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides. | |
| [* black] Viewing from the front of the printer, there is a tab in the lower left corner. | |
| [* blue] Viewing the tab hole from the bottom of the printer. | |
| - | [* yellow] Insert the mini screwdriver into the marked hole and pry out the tab. |
| + | [* yellow] Insert the mini screwdriver into the marked hole and pry out the tab. |
| [* black] Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open. | |
| [* icon_caution] This tab is the easiest to break so be very careful. |