Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Mason Morgan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* yellow] Unscrew the 3mm screw holding the flash in place
[* blue] The wires running out of the flash will need to be cut and then the new flash unit spliced into the preexisting wires.
[* black] Now you can replace the entire flash assembly.
[*
icon_caution] Beware of the flash capacitor; it still carries a good amount of charge that could shock you or fry the boards
[* black] Now you can replace the entire flash assembly.
[*
icon_caution] Beware of the flash capacitor; it still carries a good amount of charge that could shock you or fry the boards