Skip to main content

Wijzigingen aan stap #3

Bewerking door Chris Quance

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use Multimeter to test the voltage of the battery.
[* black] Put black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
[* black] Place red and black leads to the two outside metal plates on the battery as shown.
[* black] Check that the voltage displayed on the multimeter matches closely to the voltage defined on the battery.
[* black] Check that the voltage displayed on the multimeter matches closely to the voltage defined on the battery.