Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Chris Quance

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use Multimeter to test the voltage of the battery.
[* black] Put black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
[* black] Place
red and black multimeter leads againstto the two outside metal plates ofon the batterybattery as shown.
[* black] Check that voltage displayed on multimeter is closematches closely to the voltage defined on batterythe battery.
[* black] Put black lead into ground slot of multimeter and the red lead into the V(ohm)mA slot.
[* black] Place
red and black multimeter leads againstto the two outside metal plates ofon the batterybattery as shown.
[* black] Check that voltage displayed on multimeter is closematches closely to the voltage defined on batterythe battery.