Wijzigingen aan stap #13
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Remove the six screws on the logic board and five screws on the downconverter board. Note: The two screws located at the top of the down converter board(near the speaker) are larger screws than the other screws (with washers). |
|---|---|
| + | [* black] Remove the six screws on the logic board and five screws on the downconverter board. |
| + | [* icon_note] The two screws located at the top of the down converter board(near the speaker) are larger screws than the other screws (with washers). |
| [* black] Gently lift the downconverter board and logic board out of the computer. | |
| [* black] Using a flathead screwdriver, pry the plastic rivet off the board. Put the top half of the rivet back into the bottom half so it doesn’t get lost. |