Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #11

Bewerken voor Adam O'Camb —

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

-[* black] CD/HD Carrier Before you begin, position the computer upside down, resting the computer on an ESD mat or other soft surface and remove the bottom housing, EMI cover, and SDRAM.
-[* black] 1.Remove the four screws connecting the CD/HD drive carrier to the the metal chassis (also known as the divider panel).
-[* black] 2.Disconnect the following cables from the back of the CD/HD carrier: hard drive power cable, hard drive data cable, CD-ROM/DVD-ROM data cable, logic board cable connector.
+[* black] Position the computer upside down, resting the computer on an ESD mat or other soft surface and remove the bottom housing, EMI cover, and SDRAM.
+[* black] Remove the four screws connecting the CD/HD drive carrier to the the metal chassis (also known as the divider panel).
+[* black] Disconnect the following cables from the back of the CD/HD carrier: hard drive power cable, hard drive data cable, CD-ROM/DVD-ROM data cable, logic board cable connector.