Wijzigingen aan stap #10
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Air Port Card Before you begin, position the computer face down, resting the CRT on an ESD mat or other soft surface. Note: If the AirPort Card is not installed, a protective antenna cap will be attached to the antenna. |
|---|---|
| - | [* black] 1.With a flathead screwdriver or coin, turn the colored latch to open the access door. The antenna and AirPortCard will be visible when you open the access door. Note: If the AirPort card is not installed, a clear protective antenna cap will be attached to the antenna. |
| + | [* black] Position the computer face down, resting the CRT on an ESD mat or other soft surface. |
| + | [* black] With a flathead screwdriver or coin, turn the colored latch to open the access door. The antenna and AirPortCard will be visible when you open the access door. |
| + | [* icon_note] If the AirPort card is not installed, a clear protective antenna cap will be attached to the antenna. |
| [* black] Remove the AirPort Card by lifting the card straight up and out of the card guides and connector. | |
| - | [* black] |
| + | [* black] Disconnect the antenna from the small hole AirPort Card. |