Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #9

Bewerken voor Adam O'Camb —

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

-[* black] SDRAM DIMM Before you begin, position the computer face down, resting the CRT on an ESD mat or other soft surface.
+[* black] Position the computer face down, resting the CRT on an ESD mat or other soft surface.
[* black] 1.With a flathead screwdriver or coin, turn the colored latch counterclockwise on the access door.
[* black] 2.Pull the access door down to open.
[* black] 3.Push down on the plastic tabs to release the SDRAM module(s).
[* black] 4.Carefully lift the SDRAM from the slot. Note: Remove installed SDRAM from the logic board before returning the logic board to Apple.