Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Jasper Jonkman

Bewerking goedgekeurd door Jasper Jonkman

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using a Torx T6 Screwdriver, remove the indicated screws. There are 2 more in the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* red] Using a Torx T6 Screwdriver, remove the indicated screws. There are 2 more in the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Using a plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removed.