Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Angela Penaherrera

Bewerking goedgekeurd door Angela Penaherrera

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using a Torx T6 Screwdriver, remove the 4 indicated screws.
[* red]
There are 2 more inscrews at the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Using
holding a small plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removed
tab. Remove them too.
[* red] Using a Torx T6 Screwdriver, remove the 4 indicated screws.
[* red]
There are 2 more inscrews at the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Using
holding a small plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removed
tab. Remove them too.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Verwijderd