Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Justin Cogan

Bewerking goedgekeurd door Justin Cogan

Voor
Na
Ongewijzigd

Stap regels

-[* icon_caution] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown. ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
-[* black] The white ribbon cable is attached only to one piece of the hood, so simply pull it through(downward) the non-attached end as shown.
+[* red] With the screw removed, separate the two pieces of the hood by lifting it vertically.
+[* icon_caution] ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
+[* orange] Carefully pull down the white ribbon cable through the top piece of the hood.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie