Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] CuttingWith the lobo/Lightning port action outbattery out, we got started prying up the logic board...and followed its cable deep into the lower plasticy bits of the bottomcase.
[* black] Looks like we're gonna have to cut our way in anyways, so we're gonna take a shortcut and break a piece off
of this Kit-Kat bar.
[* black] With
the dealylower portion of the case removed, we get to work [product|IF145-056-2|snipping|new_window=true] off its plastic sheath. The entire case (except for the flexible hinge) is made of a hard plastic, seamlessly coated in soft silicone. Tough, but comfortable to hold.
[* black] CuttingWith the lobo/Lightning port action outbattery out, we got started prying up the logic board...and followed its cable deep into the lower plasticy bits of the bottomcase.
[* black] Looks like we're gonna have to cut our way in anyways, so we're gonna take a shortcut and break a piece off
of this Kit-Kat bar.
[* black] With
the dealylower portion of the case removed, we get to work [product|IF145-056-2|snipping|new_window=true] off its plastic sheath. The entire case (except for the flexible hinge) is made of a hard plastic, seamlessly coated in soft silicone. Tough, but comfortable to hold.