Wijzigingen aan stap #4
Bewerken voor codyduncum —
Bewerking geweigerd door Jake Devincenzi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Temporarily put the LCD back into the body of the iPad 2 and remove the front panel, being careful not to damage the digitizer cable in the process. | |
| [* red] If you are replacing the front panel with a new one, make sure to transfer over the metal camera bracket and the home button assembly. Both can be removed using a spudger and heat. | |
| + | [* black] On the new front panel, there is a small strip with two holes attached to the digitizer cable. It is ok to remove that before installation. |