Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Tom Green

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* icon_note] On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Afbeelding 2

Oude versie

Nieuwe versie