Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Naveen Krishan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* yellow] After having removed the hood and disassembled it, now locate the scanner.
-[* yellow] If the scanner does not appear as it is pictured, move it so that it is flush with the chassis(the part of the printer's hood supporting the scanner).
+[* icon_note] After having the hood removed and disassembled, locate the scanner.
+[* yellow] Adjust the scanner such that its track fits into the slotted path as shown in yellow.
[* red] If the black ribbon cable is twisted, untwist it so it appears as shown.