Wijzigingen aan stap #5
Stap regels
| + | [title] Remove the Roller Guide brackets |
|---|---|
| + | [* black] Gently pull on the Roller Guide to release the metal bracket from the shaft. |
| + | [* black] Tilt the metal bracket sideways and off of the cam. |
| + | [* black] Because the Roller Guide flexes slightly, you can now shift the metal bracket toward the rear of the printer, to disengage it from the carriage assembly. |
| + | [* black] Rotate the metal bracket upward around the Roller Guide and remove it. |