Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #7

Bewerking door Joseph Camilleri

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] This next step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* yellow] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] This next step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* yellow] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.