Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Marty Rippens

Bewerking goedgekeurd door Marty Rippens

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* red] Now removeRemove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* red] Now removeRemove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.