Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Justin Cogan

Bewerking goedgekeurd door Justin Cogan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] This step is easier with two people. Carefully have one person lift the hood of the printer 2-3 inches above where it was resting.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* yellowred] The second person will now remove the ribbon cables and wires attaching the motherboard (the only green PCB board) to the hood by gently pulling upward on them.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.
[* black] When all three cables are removed, lift the hood away from the printer and set it aside.

Afbeelding 2

Oude versie

Nieuwe versie