Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* yellow] Remove the exposed screw that was covered by the power button face.
[* icon_note] This screw is placed awkwardly. The only way to remove it with proper leverage is by holdingWe found holding a T-9 screwdriver head withT9 bit in a small item that can hold it parallel with the screw, and turning the screw slowly. Needlepair of needle nose pliers can do this jobgave us enough leverage to remove it.
[* icon_note] This screw is placed awkwardly. The only way to remove it with proper leverage is by holdingWe found holding a T-9 screwdriver head withT9 bit in a small item that can hold it parallel with the screw, and turning the screw slowly. Needlepair of needle nose pliers can do this jobgave us enough leverage to remove it.
[* icon_caution] '''Do not try and torque the screw from an angle.''' This will ruin the screw's head, and make it even more difficult to remove the screw. Only remove it as already described.