Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Joseph Camilleri

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Now remove the exposed screw that was covered by the power button face.
[* black] This screw is placed awkwardly, and theawkwardly. The only way to releaseremove it with proper leverage is by holding a T-9 screwdriver head with a small deviceitem that can hold it parallel with the screw, and turning the screw slowly. Needle nose pliers can do this job.
[* black] This screw is placed awkwardly, and theawkwardly. The only way to releaseremove it with proper leverage is by holding a T-9 screwdriver head with a small deviceitem that can hold it parallel with the screw, and turning the screw slowly. Needle nose pliers can do this job.
[* black] Do not try and torque the screw from an angle. This will ruin the screw's head, and make it even more difficult to remove the screw. Only remove it as already described.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd