Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #5

Bewerking door Justin Cogan

Bewerking goedgekeurd door Justin Cogan

Voor
Na
Ongewijzigd

Stap regels

[* black] To access and remove the forthfourth and final screw attaching the hood ofhood, the printer, the facepanel for the power button needs to firstmust be removed as follows:
[* red] Reach into the mouth of the printer and press on the small clip behind the power button. This will enableallows the facepanel of the power button to be removed.
[* icon_note] A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button:button panel by pulling from right side to left side to left.
[* black] To access and remove the forthfourth and final screw attaching the hood ofhood, the printer, the facepanel for the power button needs to firstmust be removed as follows:
[* red] Reach into the mouth of the printer and press on the small clip behind the power button. This will enableallows the facepanel of the power button to be removed.
[* icon_note] A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button:button panel by pulling from right side to left side to left.