Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #5

Bewerking door Justin Cogan

Bewerking goedgekeurd door Justin Cogan

Voor
Na
Ongewijzigd

Stap regels

[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* black] To access and remove the forth and final screw attaching the hood of the printer, the face for the power button needs to first be removed as follows:
[* yellowred] Reach into the mouth of the printer and press on the small clip behind the power button. This will enable the face of the power button to be removed.
[* icon_note] A picture of the power button removed is provided to show the location of the clip that needs to be pressed.
[* black] After pressing the clip, pull out the face of the power button: right side to left side.

Afbeelding 2

Oude versie

Nieuwe versie