Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #14

Bewerking door engfahd1433

Bewerking goedgekeurd door Carsten Frauenheim

Voor
Na
Ongewijzigd

Stap regels

[title] Remove Top Metal Shield
[* red] Remove twelve T9 security torx screws, be careful not to lose the small metal nut under the black cover on the top left side of this picture this nut is for one of the two longest screws that holds the power supply that was removed on step 8. (See step 20 in this post)
[* red] Remove twelve T9 security torx screws, be careful not to lose the small metal nut under the black cover on the top left side of this picture this nut is for one of the two longest screws that holds the power supply that was removed on step 8. (See step 20 in this post)
[* blue] Remove six PH 0 phillips screws
[* yellow] Remove three PH 0 phillips screws
[* green] Remove two PH 0 phillips screws
[* black] Pull the top metal shield off of the console.