Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Spencer Martin

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] This next step is easy. Simply remove the 4 Phillips Head Screws indicated by the red circles, then using your screwdriver, push thru the hole indicated by the red square. This will remove the bottom panel. Hint: It will be helpful to pick the netbook up before pushing thru the hole with your screwdriver.
[* black] Once you have removed the panel, you can clearly see you now have access to the hard drive bay, the RAM memory module and the WLAN module.
[* black] Replacing the back panel is simply a reversal of these steps. I hope this tutorial has been helpful.
[* black] This next step is easy. Simply remove the 4 Phillips Head Screws indicated by the red circles, then using your screwdriver, push thru the hole indicated by the red square. This will remove the bottom panel. Hint: It will be helpful to pick the netbook up before pushing thru the hole with your screwdriver.
[* black] Once you have removed the panel, you can clearly see you now have access to the hard drive bay, the RAM memory module and the WLAN module.
[* black] Replacing the back panel is simply a reversal of these steps. I hope this tutorial has been helpful.

Afbeelding 2

Geen vorige afbeelding

Toegevoegd