Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Kelvin

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the following 3 screws:
[* red] One 11 mm PhillipsPhillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* red] One 11 mm PhillipsPhillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
[* icon_reminder] The shorter of the three screws goes in the middle.