Ga door naar hoofdinhoud

Wijzigingen in stap #9

Bewerken voor David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom herePlace the ignition coil and dust boot back over the spark plug by pushing down and twisting it into place.
[* black] Reconnect the ignition coil electrical connector by snapping it back into place.
[* icon_note] After installing your new spark plugs, compare the old ones to a [http://www.bikebandit.com/assets/digital_assets/How-to-Read-a-Spark-Plug.gif|spark plug wear chart] to determine if there are any issues with the way your engine is running. A similar chart can be found in the back of all Haynes repair manuals
.
[* black] Insert wisdom herePlace the ignition coil and dust boot back over the spark plug by pushing down and twisting it into place.
[* black] Reconnect the ignition coil electrical connector by snapping it back into place.
[* icon_note] After installing your new spark plugs, compare the old ones to a [http://www.bikebandit.com/assets/digital_assets/How-to-Read-a-Spark-Plug.gif|spark plug wear chart] to determine if there are any issues with the way your engine is running. A similar chart can be found in the back of all Haynes repair manuals
.