Ga door naar hoofdinhoud

Wijzigingen aan stap #18

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* black] Continue pivoting the board around the top edge of the phone to expose the single antenna connector on the underside of the logic board.
-[* icon_caution] Do not attempt to fully remove the logic board, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.
+[* black] Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board.
+[* icon_caution] Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.