Repair a Cracked or Buckled Polyurethane Surfboard stap #9 geschiedenis

Wijzigingen aan stap #9

Bewerken voor Ryan Kirkpatrick — 11 okt. 2015

Bewerking goedgekeurd door Ryan Kirkpatrick

-	[* black] Apply mixture over the foam ~~on both of the sides~~. Do not worry about overflowing slightly onto the board, this will be sanded off.
-	[* black] Allow mixture ~~two hours~~ to cure.
+	[* black] Apply mixture over the foam. Do not worry about overflowing slightly onto the board as this will be sanded off. However, do try to avoid runs.
+	[* black] Allow mixture and hour and a half to cure.
	[* black] Repeat on other side of board.
+	[* icon_note] You may want to place a piece of tape towards the rail to stop the resin from flowing over the rail. We will glass the rail in the next step.