Wijzigingen aan stap #7
Bewerken voor Ryan Kirkpatrick —
Bewerking goedgekeurd door Ryan Kirkpatrick
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* icon_caution] Put your eye protection back on. |
|---|---|
| + | [* icon_caution] Put your eye and lung protection back on. |
| [* black] Sand the overhanging foam down with rough sand paper. Don't be afraid to hit the fiberglass, it will be fine. | |
| - | [* black] Sand the foam so that there is a slight concave relative to the deck (or bottom of the board). This will be where the resin will sit. |
| + | [* black] Sand the foam so that there is a slight concave relative to the deck (or bottom of the board). This will be where the resin will sit. |
| [* black] Be careful around the rail. Use the fiberglass of the non-damaged rail to guide the shape of the foam here. |