Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #7

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the 3.4 mm Phillips screw near the vibrator motor.
[* orange] Use a small flathead screwdriver to removeRemove the two 3.6 mm standoffsstandoff screws along the side of the logic board nearest the battery opening.
[* orange] Use a small flathead screwdriver to removeRemove the two 3.6 mm standoffsstandoff screws along the side of the logic board nearest the battery opening.