Skip to main content

Wijzigingen aan stap #3

Bewerking door Jeremy

Bewerking geweigerd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* icon_caution] Depending on the strength of the adhesive holding the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so, you'll need to work the plastic spudger around the battery to release the adhesive. Too much pressure exerted at any one point could short the battery internally rendering it useless.
[* black] Remove the battery. Use a 2" putty knife on tab side if you have to.
[* black] Remove the battery. Use a 2" putty knife on tab side if you have to.
[* icon_note] Do not remove the plastic tab from the iPhone.