Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* icon_caution] If the tab breaks before the battery is freed, carefully slide a spudger under the battery tab to release the adhesive. Prying in other places may cause damage.
[* black] Remove the battery.
[* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.
[* black] Before reassembly, clean metal-to-metal contact points with a de-greaser such as windex. The oils from your fingers have the potential to cause wireless interference issues.
[* black] Perform a [guide|44534|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.