Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door David Hodson —

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the two 5.6mm (.22in) long black screws from the front plate of the camera using a #00 Phillips screwdriver. Then remove the two 4.5mm screw than holdsscrews that hold the front plate edge on the bottom of the camera.
[* red] Remove the two 5.6mm (.22in) long black screws from the front plate of the camera using a #00 Phillips screwdriver. Then remove the two 4.5mm screw than holdsscrews that hold the front plate edge on the bottom of the camera.

Afbeelding 1

Oude versie

Nieuwe versie