Ga door naar hoofdinhoud

Wijzigingen aan stap #26

Bewerking door Paige Reisman

Bewerking goedgekeurd door Paige Reisman

Voor
Na
Ongewijzigd

Stap regels

-[* black] Slide an opening card underneath the center of the motherboard, pushing it as far in as it will go.
+[* black] Slide an opening card underneath the center of the motherboard, pushing it in as far as it will go.
[* black] Slowly pry the entire motherboard up.
-[* icon_caution] If any portion of the motherboard requires excessive force to pry up, stop prying and re-apply the iOpener and return to the corresponding step to further loosen the adhesive.
+[* icon_caution] If any portion of the motherboard requires excessive force to pry up, stop prying, re-apply the iOpener, and re-perform the corresponding guide steps to fully release the adhesive.