Ga door naar hoofdinhoud

Wijzigingen aan stap #26

Bewerking door Paige Reisman

Bewerking goedgekeurd door Paige Reisman

Voor
Na
Ongewijzigd

Stap regels

-[* black] Finally, with most of the adhesive loosened, slide an opening card underneath the center of the motherboard.
-[* black] Push the card as far back as it will go, then pry the entire motherboard up.
-[* icon_caution] If any part of the motherboard requires excessive force to pry up, stop prying and instead return to the step corresponding to that portion of the motherboard.
+[* black] Slide an opening card underneath the center of the motherboard, pushing it as far in as it will go.
+[* black] Slowly pry the entire motherboard up.
+[* icon_caution] If any portion of the motherboard requires excessive force to pry up, stop prying and re-apply the iOpener and return to the corresponding step to further loosen the adhesive.