Ga door naar hoofdinhoud

Wijzigingen aan stap #24

Bewerking door Paige Reisman

Bewerking goedgekeurd door Paige Reisman

Voor
Na
Ongewijzigd

Stap regels

-[* black] Insert the opening tool underneath the other side of the rectangular cut out.
-[* black] Pry the motherboard up.
-[* black] Slide the opening tool down.
+[* black] Insert the opening tool on the other side of the rectangular cut out on the upper portion of the motherboard and pry it up.
+[* black] While keeping the opening tool underneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
+[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.