Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Allen Pasch

Wachtend op goedkeuring


Stap regels

-[* black] Starting along the top edge, separate the front of the case from the back of the case by inserting an ipod opening tool into the crack around each side of the device.
-[* icon_caution] Do not pull the top half away from the bottom half. They are still connected by the antenna ribbon cable.
-[* black] Separate all four sides of the device before pulling the halves apart.
+[* icon_caution] Do not pull apart the front and back of the device. The front and back are connected by ribbon cables.
+[* black] Starting along the top, separate the front and back of the device by pushing an iPod opening tool into the crack along each side of the case.

Afbeelding 2

Oude versie

Nieuwe versie