Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Robert Manno

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove 2 screws, and detachscrews using a screwdriver.
[* black] Detach
3 ribbons, allribbons by pulling up on them. All are on the front of the cameracamera.
[* black] Remove newly exposed screw, and unhingescrew with screwdriver.
[* black] Unhinge
black tab to slide out ribbonribbon.
[* black] OnlyThe only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops outout.
[* black] Remove 2 screws, and detachscrews using a screwdriver.
[* black] Detach
3 ribbons, allribbons by pulling up on them. All are on the front of the cameracamera.
[* black] Remove newly exposed screw, and unhingescrew with screwdriver.
[* black] Unhinge
black tab to slide out ribbonribbon.
[* black] OnlyThe only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops outout.