Ga door naar hoofdinhoud

Wijzigingen in stap #11

Bewerken voor Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom hereWhile it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces together, heating the area you are working on with a heat gun as necessary.
[* icon_note] If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on
.
[* black] Insert wisdom hereWhile it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces together, heating the area you are working on with a heat gun as necessary.
[* icon_note] If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on
.