Ga door naar hoofdinhoud

Wijzigingen in stap #10

Bewerken voor Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert a plastic opening tool between the metal LCD frame and the front bezel.
[* icon_caution] Be sure you are prying between the metal LCD frame and the front bezel, not'''not''' between the metal LCD frame and the LCD.
[* icon_caution] Be sure you are prying between the metal LCD frame and the front bezel, not'''not''' between the metal LCD frame and the LCD.
[* icon_note] It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool.
[* black] Use the flat end of a metal spudger to gently pry up the adhesive securing the metal LCD frame to the front bezel, taking special care not to scratch the LCD panel.