Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* red] Remove the two 3.6 mm Torx screws next to the dock connector.
-[* icon_caution] The 5-Point Screwdriver should only be used once as it has the potential to strip the screws.
+[* red] Using the Pentalobe screwdriver and remove the two 3.6 mm Torx screws near the dock connector.
+[* icon_caution] The 5-Point Pentalobe screwdriver should only be used a limited amount of times because it has the potential to strip the screws.