Wijzigingen aan stap #7
Bewerken voor Miroslav Djuric —
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* icon_note] Attach the red lead first, followed by the white lead, and finish with the black lead. |
|---|---|
| + | [* black] Place the wire from the new battery onto the new solder bead. |
| + | [* black] Press the tip of the soldering iron onto the solder bead until it melts. |
| + | [* black] Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron. |
| + | [* black] Continue with the other two connections the same way, taking special care not to solder two of the connectors together. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd