Wijzigingen aan stap #5
Bewerken voor Miroslav Djuric —
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* icon_note] We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol. |
|---|---|
| + | [* black] Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board. |
| + | [* black] Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd