Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] At this point,black] Use tweezers to peel away any remaining adhesive from both the rear glass panel should be fully separated fromand the body of the phone, although the adhesive strip may be attached to both sidesphone's chassis.
[* black] PullThen, clean the rear panel upadhesion areas with high concentration isopropyl alcohol (at least 90%) and away to completely separate ita lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* icon_note] At this point,black] Use tweezers to peel away any remaining adhesive from both the rear glass panel should be fully separated fromand the body of the phone, although the adhesive strip may be attached to both sidesphone's chassis.
[* black] PullThen, clean the rear panel upadhesion areas with high concentration isopropyl alcohol (at least 90%) and away to completely separate ita lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* icon_reminder] Follow [guide|47490|this guide] to reinstall the rear glass.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Verwijderd

Afbeelding 3

Verwijderd